This textured paint is used to obtain creative decorative effects. Surface coated with the paint glitter with pearly reflections in the light and create a three-dimensional effect of depth. Perfect visual effects are obtained both in artificial and natural light. Silver Sand contains special texture additives which create a pattern of sand blown by wind during paint application. The product is used for indoor walls and ceilings. It is perfect for living rooms and areas, corridors as well as conference rooms, hotels and restaurants. With its original and fine texture, it will be a unique decoration of each room. The paint is available in a palette of ready colours and as a base to be dyed using Primacol Decorative colourants.
Substrate preparation: The substrate should be durable, strong, dry, smooth, free of dust, residual adhesives and paints. Fresh plaster can be painted after 3-4 weeks of seasoning. Losses of material and cracks must be repaired and made even using filler putty. In order to reduce product consumption, it is recommended to paint the substrate with a Decobase paint of a colour similar to that of the effect (see the Decobase paint number on the lid).
Instructions for use: Painting must be performed at a temperature > 5 °C. Avoid direct sunlight on the surface being painted. Mix the paint thoroughly before use. Apply the product with a flat brush. Depending on the desired effect, painting can be done vertically, horizontally, slantwise, in the chevron pattern or an irregular pattern. The manner of painting determines the decorative effect to be obtained. Stage your paintwork. Paint a small area of approx. 1 m2 at a time.
Important! Before performing the proper job, it is always recommended to make a spot test to become familiar with the application method and the visual effect. The manufacturer shall not be liable for any misuse of the product. For the entire surface, it is recommended to use products from the same batch. Otherwise, mix the contents of all product packaging in one container.
Due to limitations of printing technology, the presented colour should be considered as approximate only. Any deviation shall not be the reason for any customer complaint. Request a pattern book with accurate colours from your seller.
Once the job is completed, ventilate the room until the odour is gone.
Storage: Store within a temperature range of 5 °C to 25 °C in dry area in the original, tight container. Protect from frost and direct sunlight.
Keep out of reach of children. The product contains a mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May cause an allergic reaction.
VOC limit (cat. A/I/FW) 200 g/l, product contains < 200 g/l.
See the container for the shelf life and batch number.
Number of layers: 1
Dry to touch: 4-8 h
Proper drying: 24 h
Application method: flat brush
Coverage: 10-15 m2/l depending on layer thickness and desired final effect
Tool cleaning: water with detergent