Royal Silk 1 kg Pluto R7

High-quality paint for indoor use with a structure imitating the surface of silk fabric. Due to the presence of pearly filler material, the surface to be decorated obtains an effect of glimmering reflections that change with respect to the angle of light incidence. The paint is available in a palette of ready colours and as a base to be dyed using Primacol Decorative colourants. Once dried, it creates a durable and washable coating.

Substrate: For use on cement, cement-lime substrates, gypsum boards and already painted surfaces. The substrate should be cleaned of dirt and dust, degreased, even, dry, strong and crack-free. Remove residues of paints, wallpaper and unstable plaster. Patch any spalling. Freshly applied cement plaster and cement-lime plaster should be seasoned for at least 4 weeks.

Instructions for use: Important! The product requires the person performing the job to have particular skills in application of such materials. Before performing the proper job, make a spot test to become familiar with the application method and the visual effect that can be obtained. The manufacturer shall not be liable for any misuse of the product. For the entire surface, it is recommended to use products from the same batch. Otherwise, mix the contents of all product packaging in one container.

Due to limitations of printing technology, the presented colour should be considered as approximate only. Any deviation shall not be the reason for any customer complaint. Request a pattern book with accurate colours from your seller.

1. In order to reduce product consumption, it is recommended to paint the substrate with a Decobase paint of a colour similar to that of the effect (see the Decobase paint number on the lid).

2. Apply a layer of Royal Silk paint on dry surface using a Venetian trowel. Perform this step on small areas and in various directions to cover the entire surface. Thickness of the applied layer should not exceed 1 mm.
3. When the decoration is drying, smooth the surface using a trowel. Keep moving the trowel in various directions. In this way, metallic reflections will be obtained.
4. If necessary, once dried (after about 4 hours), apply another layer and proceed in the same way as for the first layer.
5. Once the product is applied, vent the room until the odour has gone. Full strength properties are attained after 28 days.

Storage: Store the product in the original, tight container within a temperature range of 5°C to 25°C.

Keep out of the reach of children. Protect from sunlight. Protect from frost. Contains: 2-methyl-2H-isothiazol3-one, 1,2-benzisothiazol-3(2h)-one, mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May cause an allergic reaction.

VOC limit (cat A/I/FW) 200 g/l, product contains < 200 g/l.

See the container for the shelf life and batch number.

Additional information:

• decorative paint for indoor use
• washable
• silk effect

Coverage: 7-9 m²/kg (one layer)

Dry to touch: 1-2 h

Proper drying: 24 h

Thinner: water

Tool cleaning: water with detergent