Quantity: pcs
Unicell Poland Sp. z o. o.
Capacity:10 L
Brand:Primacol Professional

A professional latex paint with a matt coat finish. Intended for the decorative painting of indoor walls and ceilings. Resistant to wet scrubbing to allow the removal of soiling without damaging the coat. It is resistant to scrubbing, has an excellent hiding power and a highly durable colour. The paint is environmentally friendly and has a minimum content of volatile organic compounds; compliant with EN-71 "Safety of Toys".

Substrate preparation: The substrate should be level, clean, dry and stable. Paint fresh plasterwork within a minimum of four weeks from installation. Uneven or highly absorptive substrates should be primed with Primacol priming paint. Before work, cover all surfaces that are not to be painted. Carefully prepared surface will ensure an optimum painting effect.

Painting: Stir the paint thoroughly before use. The best effect is achieved by painting with a short or medium-haired roll brush. Dilute the paint with a maximum of 5% of water if necessary. Pick up the paint with the roller generously and spread it evenly on the substrate. Paint each successive patch with the wet on wet method. Finish painting of each patch by moving the roller in the same direction. Do not paint with the roller when it is half-dry to avoid smudging. Do not interrupt painting or apply local corrections. Paint the ceilings along the incidence of light by starting from the windows and working towards the inside of the room. Apply the second coat once the first one has dried. The paint has full service properties in 28 days from application.

Storage: Protect from frost. Keep in a sealed container, away from direct sunlight and between 5o and 30°C.

Keep out of the reach of children. If paint is swallowed, immediately seek medical attention and show the container or label.

Additional information:

  • scrubbing resistant
  • excellent hiding power
  • highly durable colour
  • ecological and safe

Coverage: up to 14 m2/l per layer

Dry to touch: 1h

Second layer application: 4h

Fully dry: 24h

Tool cleaning: hot water